Furious FPV PikoF4 - Micro Sized, Massive
Revolutionizing the FPV scene, Furious FPV pushes it to
the max with the all new PikoF4 Flight Controller, featuring a no compromise
design that is ready to immerse itself into your favorite FPV machine.
Designed as a stackable unit with the feature packed
INNOVA V4, the PikoF4 pushes the envelope of performance with F4 processing
power that provides "on the rails" flight capability, augmented by an
MPU6000 sensor package with ultra high 8kHz sampling rates. Furthermore, adding
a massive 100A maximum built in PDB, the PikoF4 is designed for the extremes of
Featuring 16MB of Black Box flash memory for critical
flight data breakdown, the PikoF4 is as cutting edge as it comes, featuring a
built-in inverter for Smartport connection directly to the FC. Offering rich
and brilliant feature when it comes to data feedback for optimal tuning &
setup functionality, the PikoF4 is the tuners’ dream for on demand in-flight
Integrated with an Inrush Voltage Protection system
(Input & Output) via Transient Voltage Suppressor, the PikoF4 is wickedly
technical & ready for anything. Add a built in driver inverter for S-bus
& integrated buzzer driver with a 5V 1A integrated BEC, the PikoF4 is the
all-in-one FC solution that provides everything your quad needs in an ultra simplified
Step into the Furious FPV PikoF4 - potent capability
coalesced with race winning functionality designed to push your FPV to the
outer edges & beyond.
- F4 Processing
- Built In 100A
- MPU6000 6 Axis Sensor
- 16MB Black Box
- LED Driver for
WS2812b Programmable LED's
- Integrated Buzzer
- Built In Driver
Inverter for S-bus Capability
- Integrated 5V 1A
BEC w/ 2S 7.4V - 6S 22.2V LiPo Power
- Inrush Voltage
Protection Input / Output via Transient Voltage Suppressor
- Stackable w/
- Stackable ESC
Download User Manual: Piko F4
BETAFLIGHT TARGET: Betaflight_3.2.1_PikoF4.hex
Download: Guideline install and configuration TRUE VISION CONFIGURATOR
Firmware update via Betaflight
Instruction video :
- Piko F4 Flight Controller x 1pc
- Damper M2 x 6pcs
- 4pin silicon cable for Piko F4 x 1pc
Size: 27x27mm, mounting hole 20x20mm
Screws: M2 with dampers, M3 without dampers
Voltage Input: 2S 7.4V - 6S 22.2V LiPo Power
PDB: 100A Maximum
Processor: F4 Chip
BEC: 5V 1A
F4 Processing Power - Pushing It to the Max.
Taking a step far and above the original Piko FC, the all
new PikoF4 is augmented to harness the processing power of the F4 chip for epic
"on the rails" FPV flight.
Integrated 100A Maximum PDB - Power to the
Don't let the small size fool you. The PikoF4 pushes the
big numbers with 100A PDB capability, so put your worries aside when it comes
to amperage limits. The PikoF4 has it covered.
16MB Black Box Flash Memory - Stay In the
Analyzing your flights is easier than ever with room to
spare for massive data downloads. With the 16MB of Flash Memory available, the
Black Box feature provides endless amounts of data to push the analytics of
your last flight to the absolute limits.
Stackable with the INNOVA & 4in1 10A ESC
- Stack em' Up.
Bring all new levels of integration & incredible
levels of capability by stacking the PikoF4. This system takes full advantage
of ultra capable systems like the INNOVA V4, but brings about ultra simplified
builds that are clean, purposeful and ultimately powerful.
Input & Output Inrush Voltage Protection
- Safety is Key.
Protecting against extreme voltage spikes, the Inrush
Input & Output Voltage protection keeps everything safe, making sure
transient voltage spikes do no damage when pushing the extremes.
MPU6000 Sensor Package - 6 Axis FPV
With a 3 axis gyroscope, 3 axis accelerometer in a 4x4
packaging, the MPU600 is the world's 1st 6 axis sensor the provides massive
capability & precision & an ultra compact package. With ultra high 8kHz
sampling rate, this incredible sensor is your key to epic FPV.
Programmable LED Driver Functionality -
Light It Up.
Integrated with an LED driver for WS2812b Programmable
LED's, you now have full control of LED capability, allowing you to light up
the skies with a custom array of LED functionality.
Piko F4 FC review by Killa Klown FPV
[Q]: QUESTION: When I flashed Firmware and
configure everything according to instruction but one of my motor does not
[A]: ANSWER: Piko has 2 editions: black and
red. If you are using black but flashing firmware for Red edition and vice
versa then you are going to experience this issue. To fix this, please flash
the correct firmware.
[Q]: QUESTION: When I connect FC with computer
then it message “USB device not recognized” and cannot connect to BetaFlight.
[A]: ANSWER: This circumstance can be
caused due to wrong or malfunctioned driver. Please uninstall the current
driver and reinstall driver from our website. In addition, you can use
“ImpulseRC Driver Fixer” software to fix the driver.
[Q]: QUESTION: Connect and successfully
flash firmware, go to Betaflight to configure and then plug out and reconnect
then it goes to DFU
[A]: ANSWER:. In this circumstance, it is
because you did not de-solder the “BOOT”. Please flash firmware and de-solder
[Q]: QUESTION: I am using ESC 4in1 and
PIKOF4. The Flight Controller does not have 5V when power from the ESC?
[A]: ANSWER: Maybe you have missing out few
connections between ESC and FC. Please make sure you have connected the power
from ESC to FC. Then check if the soldered joints are good and make sure that
all the connections are correct.